編譯NS2-NIST_mobility時遇到的問題與解決方法

今天在安裝NIST所release支援mobility的ns-2.29版本http://www.antd.nist.gov/seamlessandsecure/download.html，在編譯時遇到以下幾個問題：

問題1:
./sctp/sctp.h:705: error: extra qualification 'SctpAgent::' on member 'DumpSendBuffer'
make: *** [trace/trace.o] Error 1
解決方法:
將sctp.h裡面第705行DumpSendBuffer function前面的'SctpAgent::'去掉.

問題2:
./mobile/god.h:88: error：extra qualification ‘vector::’ on member ‘operator=’
./mobile/god.h:93: error：extra qualification ‘vector::’ on member ‘operator+=’
./mobile/god.h:98: error：extra qualification ‘vector::’ on member ‘operator==’
./mobile/god.h:101: error：extra qualification ‘vector::’ on member ‘operator!=’
解決方法:
分別將mobile/god.h內相對應的‘vector::’刪去.

問題3:
./mac/mac-802_11.h:620: error: extra qualification 'Mac802_11::' on member 'calFreq'
make: *** [mac/mac-802_11.o] Error 1
解決方法:
將mac/mac-802_11.h內相對應的'Mac802_11::'刪去.

會有以上三種類似的問題是因為gcc版本的關係!!

問題4:
dsr/dsragent.cc: In member function ‘void DSRAgent::handleFlowForwarding(SRPacket&, int)’:
dsr/dsragent.cc:828: error: ‘XmitFlowFailureCallback’ was not declared in this scope
dsr/dsragent.cc: In member function ‘void DSRAgent::sendOutPacketWithRoute(SRPacket&, bool, Time)’:
dsr/dsragent.cc:1385: error: ‘XmitFailureCallback’ was not declared in this scope
dsr/dsragent.cc:1386: error: ‘XmitFlowFailureCallback’ was not declared in this scope
dsr/dsragent.cc:1403: error: ‘XmitFailureCallback’ was not declared in this scope
make: *** [dsr/dsragent.o] Error 1
解決方法:
將

voidXmitFailureCallback(Packet *pkt, void *data){ DSRAgent *agent = (DSRAgent *)data; // cast of trust agent->xmitFailed(pkt);}
voidXmitFlowFailureCallback(Packet *pkt, void *data){ DSRAgent *agent = (DSRAgent *)data; agent->xmitFlowFailed(pkt);}

這兩個function移到218行左右,或是在218行加上
void XmitFlowFailureCallback(Packet *pkt, void *data);
void XmitFailureCallback(Packet *pkt, void *data);

問題5:
diffusion/diffusion.cc: In member function 'void DiffusionAgent::MACprepare(Packet*, nsaddr_t, int, bool)':
diffusion/diffusion.cc:429: error: 'XmitFailedCallback' was not declared in this scope
make: *** [diffusion/diffusion.o] Error 1
解決方法:
參考問題4.

問題6:
diffusion/omni_mcast.cc: In member function 'void OmniMcastAgent::MACprepare(Packet*, nsaddr_t, unsigned int, bool)':
diffusion/omni_mcast.cc:388: error: 'OmniMcastXmitFailedCallback'was not de clared in this scope
make: *** [diffusion/omni_mcast.o] Error 1
解決方法:
參考問題4.

問題7:
tcp/tcp-sack-rh.cc:68: error: extra qualification 'SackRHTcpAgent::' on member 'newack'
make: *** [tcp/tcp-sack-rh.o] Error 1
解決方法:
將tcp/tcp-sack-rh.cc內相對應位置的SackRHTcpAgent::刪去.

問題8:
pgm/pgm-agent.cc:307: error: extra qualification 'PgmAgent::'on member 'trace_event'
make: *** [pgm/pgm-agent.o] Error 1
解決方法:
將pgm/pgm-agent.cc內相對應位置的PgmAgent::刪去.

問題9:
pgm/pgm-sender.cc:189: error: extra qualification 'PgmSender::' on member 'trace_event'
make: *** [pgm/pgm-sender.o] Error 1
解決方法:
將pgm/pgm-sender.cc內相對應位置的PgmSender::刪去.

問題10:
pgm/pgm-receiver.cc:186: error: extra qualification 'PgmReceiver::' on member 'trace_event'
make: *** [pgm/pgm-receiver.o] Error 1
解決方法:
將pgm/pgm-receiver.cc內相對應位置的PgmReceiver::刪去.

問題11:
bluetooth/lmp-link.h:296: error: extra qualification 'LMPLink::' on member 'LMPLink'
bluetooth/bt-node.h:100: error: extra qualification 'BTNode::' on member 'setup'
make: *** [bluetooth/baseband.o] Error 1
解決方法:
將bluetooth/lmp-link.h與bluetooth/bt-node.h內相對應位置的LMPLink::和BTNode::刪去.